FLOWLINE Switch-Tek® LU10 Ultrasonic Short Point Liquid Level Switch, Polypropylene, 3/4 in. NPT LU10-1305

Flowline's Switch-Tek® LU10 single point switches are CSA approved for use in hazardous locations, the intrinsically safe ultrasonic liquid level switch provide high/low liquid level detection of chemical, solvent or low viscosity petroleum based liquids with a 1A relay output. For use with Hydrochloric Acid, Acetone and Diesel fuel oil. This level switch is made of polypropylene (PP) and is submersible, it is universally mounted through the tank wall or inside of the tank and then connected to a PLC or relay controller. Features 60VA SPST relay selectable NO or NC via power supply wiring polarity Submersible PP sensor and cable for corrosive liquids Compatible with Flowline's Smart Trak and Switch-Pak installation fittings CSA approved intrinsically safe for use in hazardous environments For use as a high or low level switch in applications Well suited for use with highly corrosive liquids Specifications Single point switches Universal level short switch 3/4 in. NPT process mount Accuracy: ± 0.039 in. (1 mm) in water Repeatability: ±0.019 in. ( 0.5 mm) in water Supply voltage: 12-36V DC Consumption: 25 mA max. Contact type: (1) SPST relay Contact rating: GP: 60VA, IS: 32 VDC@0.5A Contact output: Selectable NO/NC Process temperate: -40° to 176° F (-40° to 80° C) Pressure: 150 PSI ( 10 Bar) at 77° F Sensor rating: NEMA 6 (IP68) Sensor material: PP (polypropylene) Polypropylene cable jack Cable: 10 ft. (3 m) 4-conductor, shielded # 22 AWG Viton® gasket Intrinsically safe classification Sensor dimensions: 3.0 in. (76 mm) L x 0.7 (19 mm)dia. with Cable: 10 ft. (3m) L Certification: CSA, LR 79326 Compliance: CE Approvals: Class I, Groups A,B,C &D; Class II,, Groups E, F &G, Class III Parameters: Vmax= 32V, Imax+ 300mA, Pmax = 1.3W, Ci=0 µF, Li=0µH Downloads Datasheet (PDF Download) Brochure (PDF Download) Manual (PDF Download)