FLOWLINE Switch-Tek® LO10 Optical Leak Detection Short Switch, 3/4 in. NPT LO10-1305

Flowline's Switch-Tek® LO10 general purpose optic leak switch provides liquid leak detection in and around secondary containment sumps, tanks and piping systems with a 1A relay output. For use with Sulfuric Acid and Sodium Hypochlorite. This leak detection switch is made of polypropylene (PP) and is submersible, it is universally mounted through the containment wall or within the interstitial space and then connected to a PLC or relay controller. Features 60VA SPST relay selectable NO or NC via power supply wiring polarity Rugged polypropylene sensor and cable for corrosive liquids Sensor may be located up to 1000 ft. from a Flowline relay controller Fail-safe leak sensor inverts "wet" to alert user for maintenance Submersible sensor and cable designed for insertion within a secondary containment wall Requires only a small amount of liquid to detect the presence of a leak Specifications Single point switches Optic liquid leak detection switch 3/4 in. NPT process mount Accuracy: ± 0.039 in. (1 mm) in water Repeatability: ±0.019 in. ( 0.5 mm) in water Supply voltage: 12-36V DC Consumption: 25 mA max. Contact type: (1) SPST relay Contact rating: 60VA, 1A max. Contact output: Selectable NO/NC Process temperature: -40° to 176° F (-40° to 80° C) Pressure: 150 PSI ( 10 Bar) at 77° F Sensor rating: NEMA 6 (IP68) Sensor material: PP (polypropylene) Polypropylene cable jack Cable: 10 ft. (3 m) 4-conductor, shielded # 22 AWG General purpose classification Sensor dimensions: 3 in. (76mm) L x 0.7 in. (19 mm) W with 10 ft. (3m) L cable Compliance: CE Downloads Datasheet (PDF Download) Brochure (PDF Download) Manual (PDF Download)