Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless UKAS Calibration
Brand:
Megger
MFR Code:
1008-123
Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless UKAS Calibration
| Megger
Technical Specifications
| Calibrated | UKAS |
| Loop Impedance Test Type | 2 Wire, 3 Wire |
| Automatic RCD Test | Yes |
| Model Number p | MFT1721 |
| RCD Ramp Test | Yes |
| Non-Tripping | Yes |
| Insulation Test Voltage | 100 V, 250 V, 500 V, 1000V |
| Maximum Voltage Measurement | 600V |
| Test Type | Continuity |
| Earth Resistance Measurement | Yes |
| Downloadable Data | Yes |
| Interface Type | Wireless |
| Continuity Test Current | 200mA |
| RCD Test Type | A, AC, B, S |
| IP Rating | IP54 |
| Test Standards | EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007 |
| Weight | 1 (with Battery; Excluding Case)kg |
| Height | 150mm |
| Maximum Operating Temperature | +55°C |
| Dimensions | 85 x 235 x 150mm |
| Continuity Range | 0.01 → 99.9 kΩ |
| Voltage Measurement Range | 10 → 600V |
| Safety Category Level | CAT III, CAT IV |
| Maximum Continuity Resistance | 99.9kΩ |
| Minimum Continuity Resistance | 0.01Ω |
| Power Source | Battery |
| Plug Type | BS 1363, LT 300-EN-BS |
| Battery Type | AA Alkaline |
| Safety Category Voltage | 300 V, 600 V |
| Width | 235mm |
| Display Type | LCD |
| Minimum Operating Temperature | -10°C |
| Length | 85mm |
| Safety Category | CAT III 600 V, CAT IV 300 V |
| Operating Temperature Range | -10 → +55 °C |