MORRISON BROS. Morrison Bros. 9095AA Series 2 in. Overfill Prevention Valves GRID_MO9095AA0200AV

Morrison Bros. 9095AA Series 2 in. Overfill Prevention Valves The Morrison 9095AA 2 in Series Overfill Prevention Valves are designed to prevent overfilling storage tanks by providing a positive shut-off during a pressurized fill. Features Installs directly onto a 4 in diameter riser or top mounted spill container Fill adapter and shut-off mechanism are factory assembled for ease of field installation Straight female threaded adapter facilitates valve installation for a precise set point Minimum shut-off height is 1 in from the tank top 2.35 in of float height adjustment Drop tube adapter accepts 2 in drop fill tubes (Morrison 419) Full flow to shut-off point, cushioned closure eliminates shock Integral pressure relief Construction Direct fill adapter: passivated aluminum Remote adapter: ductile iron, powder coated Shaft, linkage and hardware: stainless steel Lower pipe nipple: e-coated steel Drop tube adapter: passivated aluminum Body: passivated aluminum Specifications Minimum 5 PSI flow requirements Maximum operating pressure is 100 PSI Maximum viscosity of 300 centistokes A tight fill connection is required for the valve to operate Estimated flow rate is 230 GPM at 10 PSI pressure drop (See flow curve) Code Compliance ULC-S661-10 listed NFPA 30 30A UFC IFC PEI/RP200 PEI/RP 600 Florida DEP EQ-851 Downloads 9095AA EVR 2 in Overfill Prevention Valve Installation & Maintenance Instructions (PDF Download) 9095AA 3 in Overfill Prevention Valve Installation & Maintenance Instructions (PDF Download)