TITAN FLOW CONTROL 8 in. Tri-Flow Check Valve, Flanged, Cast Iron - ASME Class 125 TF21I0800

Titan Flow Control TF 21-CI Flanged Cast Iron Tri-Flow Check Valve Titan Flow Control's Tri-flow Control Check Valve is three valves in one, replacing a calibrated balance valve, shut-off valve, and silent check valve for a simplified and inexpensive way to control flow from a pump. Flow through the valve is adjustable from zero to full by the ACME rising stem. A graduated position indicator on the stem provides an accurate check of the valve's position for throttling service, and hand-wheel is provided with all Tri-Flow control check valves for ease of operation. The Tri-Flow also has a soft-seated, dovetail O-ring groove ensuring a bubble tight seal in the closed position. Features Three Valves in One: Calibrated balance valve, shut-off valve, and silent check valve Quick Closure to Reduce Water Hammer: Silent shut-off is achieved via the fully automatic, spring assisted disc that closes near zero flow velocity when functioning as a check valve - the soft seat and quick closure helps to prevent flow reversal, slamming, and surges Minimal Head Loss: The valve's body had a large body with at least 2 to 1 ratio to connecting pipe - The disc's low cracking pressure reduces the amount of energy required to open the valve Specifications Sizes: 2 - 8 in. - Larger sizes available - Please call for more information Type: Tri-Flow Control Check Valve ANSI Class: 125 Body: Cast Iron (A126-B) Seat: EPDM Disc: Ductile Iron (A536, Plated) Pressure/Temperature Rating: 200 PSI @ 150°F EPDM Temp. Range: -20 - 300°F Stainless Steel Spring Temp. Rating: 450°F Markets: Process Industry, Power Industry, Chemical Industry, Water/Oil/Gas, Waste, Mining, Paper Downloads F 21-CI Flanged Cast Iron Tri-Flow Check Valve - Installation - Operation - Maintenance Manual (PDF Download)