TITAN FLOW CONTROL 4 in. Y-Strainer, Flanged, Cast Iron - ASME Class 250 YS59I0400

Titan Flow Control YS 59-CI Flanged Cast Iron Y-Strainer - ANSI Class 250 Description Titan Flow Control's ANSI Class 250 Cast Iron Y-Strainers are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, turbines, and much more. Y strainers can be installed in a horizontal or vertical pipeline as long as the screen is in a downward position. Straining is accomplished via an internal perforated or mesh lined straining element, the size which should be determined based on the size of the smallest particle to be removed. Replacement screens and gaskets available. Please call 1 (800) 333-3331 for more information. Note: The straining element needs regular cleaning to prevent debris build up. It is not advisable to allow the differential pressure to increase by 20 PSI. Although cleaning normally requires the removal of the straining element, installing and using a Titan Blow-Off Drain Valve can increase the time between cleanings. Features Large Straining Capacity: With its large body and sizable straining element, the YS59 provides excellent open area ratios that are typically two-and-a-half times larger than the corresponding pipeline Precision Machined Seats: Precision machined screen seats in both the body and cap help to ensure accurate positioning for the screen during reassembly after cleaning - Also, the machined body seats enable finer filtration by preventing debris bypass Self Cleaning Capability: With a tapped NPT blow-off connection this unit can be fitted with a blow-down valve which facilitates cleaning of the straining element Epoxy Painted: All units are epoxy painted to help resist rust and corrosion Optional Cover Designs: Titan's YS59 is available with different cover options including sing, clamp, and hinge type covers - Please call for more details Specifications Sizes: 2 - 8 in. - Larger sizes available - Please call for more information End Type: Flanged Material: Cast Iron (A126 Gr. B) - Lead Free Type: Y (Wye) Strainer ANSI Class: 250 Pressure/Temperature Rating: 500 PSI @ 150°F Referenced Standards & Codes: ASME/ANSI B16.1 - Cast Iron Pipe Flanges and Flanged Fittings 2 - 4 in. Standard Screen Selections: Liquid: 1/16 (.0625) Open Area: 41% 5 - 8 in. Standard Screen Selections: Liquid: 1/8 (.125) Open Area: 40% 10 - 12 in. Standard Screen Selections: Liquid: 1/8 (.125) Open Area: 40% Please call for screen selections on 14 in. and larger YS 59-CI models Downloads Y Strainer - Installation - Operation - Maintenance Manual (PDF Download) Titan Flow Control Screen Order Forms (PDF Download) Titan Flow Control Screen Selection Guide (PDF Download)