TITAN FLOW CONTROL 3 in. Y-Strainer w/ 20 Mesh, Threaded, Bronze - Class 125 YS55BZ0300

Titan Flow Control YS 55-BZ Threaded Bronze Y-Strainer, Class 125, 20 Mesh Description Titan Flow Control's ANSI Class 125 Bronze Y-Strainers are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, turbines, and much more. Y strainers can be installed in a horizontal or vertical pipeline as long as the screen is in a downward position. Straining is accomplished via an internal perforated or mesh lined straining element, the size which should be determined based on the size of the smallest particle to be removed. Replacement screens and gaskets available. Please call 1 (800) 333-3331 for more information. Note: The straining element needs regular cleaning to prevent debris build up. It is not advisable to allow the differential pressure to increase by 20 PSI. Although cleaning normally requires the removal of the straining element, installing and using a Titan Blow-Off Drain Valve can increase the time between cleanings. Features Large Straining Capacity: With its large body and sizable straining element, the YS55 provides excellent open area ratios that are typically two-and-a-half times larger than the corresponding pipeline, minimizing pressure drop across the valve Precision Machined Seats: Precision machined screen seats in both the body and cap help to ensure accurate positioning for the screen during reassembly after cleaning - Also, the machined body seats enable finer filtration by preventing debris bypass Self Cleaning Capability: With a tapped NPT blow-off connection this unit can be fitted with a blow-down valve which facilitates cleaning of the straining element Threaded Cap: Straight threads to permit easy cap removal for cleaning and proper alignment when reassembling strainer Specifications Sizes: 1/4 - 3 in. End Type: Threaded Material: Bronze (C84400) ASTM B584 Type: Y (Wye) Strainer ANSI Class: 125 Pressure/Temperature Rating- Sizes 1/4 - 1 1/2 in.: 400 PSI @ 100°F Pressure/Temperature Rating- Sizes 2 - 3 in.: 315 PSI @ 100°F Referenced Standards & Codes: ASME/ANSI B16.15 Cast Bronze Threaded Fittings; ASME/ANSI B16.18 Cast Copper Alloy Solder Joint Pressure Fittings; ASMEANSI B16.50 Copper Alloy Braze-Joint Pressure Fittings 1/4 - 2 in. Standard Screen Selections: Liquid: 20 Mesh Open Area: 51.8% 2 1/2 - 3 in. Standard Screen Selections: Liquid: 1/16 (.0625) Open Area: 41% Downloads Y Strainer - Installation - Operation - Maintenance Manual (PDF Download) Titan Flow Control Screen Order Forms (PDF Download) Titan Flow Control Screen Selection Guide (PDF Download)