ULTRATECH INTERNATIONAL Ultra-Track Composite Pan Drain Manifold Center Only 7223

This is the center drain manifold only for the Composite Model Ultra-Track Pans. They are used with the pans to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. Use with Ultratech Composite track pans. Center track pans and side track pans (if ordered) must be installed concurrently to allow for proper positioning of the drain manifold and filling of the pipe trenches under the track pans. Note: Approval needed see the Rail Height Approval Sheet attached to confirm all is needed based on area covered & system looking to be put in place. Lead-times can vary. Call a JME Sales specialist 800-333-3331 to get the details Features Easy installation - minimal site preparation (no excavation) required. Constructed with high strength, non-porous, corrosion resistant PVC  Pandrol compatible. Optional flow through technology increases containment capacity for larger spills while minimizing cleanup of smaller spills. Drainage Center and Side(#7220) manifold allows pans to drain to oil/water separators, holding ponds, etc. Drainage manifold comes with clean out port to allow for removal of sludge blockages, etc. Installation requires minimal ballast removal. Meets SPCC, SWPPP and LEED regulations. Made in the USA Downloads Brochure (PDF Download) Specifications (PDF Download) Instructions (PDF Download) Chemical Compatibility (PDF Download) Adhesive SDS (PDF Download) SDS (PDF Download) Rail Height Approval Sheet (PDF Download)