GORMAN-RUPP S3A1 3 in. NPT Ductile Iron Widebase Submersible Dewatering Pump, 460V 3P, 280 GPM S3A1 460V 3P

Series S Series - Widebase Submersible Suction 3 in. (80 mm.) Discharge 3 in. (80 mm.) Flange NPT Flow-Rate 280 GPM Solids Handling 0.38 in. (10 mm.) Casing Ductile Iron Impeller/Rotor Ductile Iron Drive 460V 3 Phase Electric Motor Seal Tungsten Carbide Diffuser Ductile Iron 80-60-03; Maximum Operating Pressure 71 psi (490 kPa) Impeller Material Ductile Iron 60-40-18 Suction Head Ductile Iron 65-45-12 Intermediate Aluminum Alloy 356-T6 Motor Housing Aluminum Alloy 356-T6 Motor Shaft Stainless Steel 416 Bearings Upper, Open Single Row Ball Bearing; Lower, Open Double Row Ball Bearing Discharge Elbow Aluminum Alloy 356-T6 Gaskets Cork with Nitrile Binder (NC710) O-Rings Nitrile Rubber Wetted Hardware Standard Plated Steel and Stainless Steel Strainer Urethane Coated Steel. 50.6% Open Area, 0.38 in. (9,6 mm) Diameter Openings Hoisting Bail Urethane Coated Steel Motor Oil Filled Enclosure; 5.0 H.P.; 3450 R.P.M. Three Phase 200/230/460/575 Volt, 60 Hz, 18/16/8/6.5 Full Load AMPS, 5.3 kW (Max.) Power Cable 6 Wire; Type GGC; 8 AWG; 3 Power Conductors, 2 Ground and 1 Ground Check. Nominal Length 50 Feet (15 m) Standard Recommended Generator Size 15 kW Across the Line Start Seal Type Double, Mechanical, Type 2, Oil Lubricated Maximum Temperature of Liquid Pumped 122 F (50 C) Weight 160.00 LBS