GORMAN-RUPP S2B1 2 in. NPT Cast Iron Slimline Submersible Dewatering Pump, 230V 1P, 200 GPM S2B1 230V 1P

Series S Series - Slimline Submersible Suction 2 in. (50 mm) Discharge 2 in. (50 mm) Flange NPT Flow-Rate 200 GPM Solids Handling 0.31 in. (8 mm) Casing Cast Iron Impeller/Rotor Copper Alloy Drive 230V 1 Phase Electric Motor Seal Tungsten Carbide Suction Casing Gray Iron 30; Maximum Operating Pressure 39 psi (269 kPa) Impeller Material Copper Alloy C86500 Seal Plate Gray Iron 30 Intermediate Aluminum Alloy 356-T6 Motor Housing Aluminum Alloy 356-T6 Motor Shaft Stainless Steel 17-4 PH Bearings Upper and Lower, Open Single Row Ball Bearing Discharge Flange Aluminum Alloy 356-T6 Gaskets Cork with Nitrile Binder (NC710) O-Rings Nitrile Rubber Strainer Urethane Coated Steel; 47% Open Area, 0.31 in. (7.9 mm) Diameter Openings Hoisting Bail Urethane Coated Steel Motor Horsepower 2.0 H.P. Motor Speed 3450 R.P.M. Motor Frequency 60 Hz Single Phase Voltage 115/230 Volt Full Load AMPS 28.0/12.0 Max Power 2.6/2.4 kW Power Cable Type 4 Wire; Type SO/SOW/SOOW/SEOW/SEOOW; 14 AWG Power Cable Length 50 Feet (15 m) Standard Recommended Generator Size 6 kW Across the Line Start Maximum Temperature of Liquid Pumped 122°F (50°C) Weight 108.00 LBS