GORMAN-RUPP S2A1 2 in. NPT Ductile Iron Widebase Submersible Dewatering Pump, 115V 1P, 150 GPM S2A1 115V 1P

Part S2A1 115V 1P Series S Series - Widebase Submersible Model S2A1 Suction 2 in. (50 mm.) Discharge 2 in. (50 mm.) Flange NPT Flow-Rate 150 GPM Solids Handling 0.31 in. (8 mm.) Casing Ductile Iron Impeller/Rotor Ductile Iron Drive 115V 1 Phase Electric Motor Seal Carbon/Ni-Resist Diffuser Ductile Iron 80-60-03; Maximum Operating Pressure 49 psi (338 kPa) Impeller Ductile Iron 60-40-18 Wear Plate Carbon Steel 1045 Intermediate Aluminum Alloy 356-T6 Motor Housing Aluminum Alloy 356-T6 Motor Shaft Stainless Steel 17-4 PH Bearings Upper and Lower, Open Single Row Ball Bearing Discharge Flange Aluminum Alloy 356-T6 Gaskets Cork with Nitrile Binder (NC710) Wetted Hardware Standard Plated Steel Strainer Urethane Coated Steel; 50% Open Area, 0.31 in. (7,9 mm) Diameter Openings Hoisting Bail Urethane Coated Steel Motor Oil Filled Enclosure. 2.0 H.P.; 3450 R.P.M.; 60 Hz. 115/230 Volt, Single Phase: 28.0/14.0, Full Load AMPS, 2.8/2.8 kW (Max.) Power Cable (115V) 4 Wire; Type GGC; 8 AWG; 3 Power Conductors, 2 Ground and 1 Ground Check. Nominal Length 50 Feet (15 m) Standard. Recommended Generator Size 6 kW Across the Line Start Seal Type Double, Mechanical Oil Lubricated Maximum Temperature of Liquid Pumped 122°F (50°C) Weight 103.00 LBS