DIXON Brass Male NPT Swivel x Push-On Brass Hose Barb Fittings, Dryseal 2710402C

Dixon push-on hose barb fittings are intended for use with Lok-On/push-on style hoses only. No hose clamps or ferrules are needed and the Swivel is for assembly convenience only, not for live swivel applications. Full size range from 1/4 in. hose through 3/4 in. hose. Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap. Features Compatible hoses: Eaton Aeroquip: 2556, 2565, 2575, FC647, and FS332/ Eaton Weather head: H100, H101, and H201/ Gates: LOL, Python/ Goodyear: Auto grip, Insta-Grip, and Ultra-Grip/ Parker Hannifin: 801, 804, 821, 831, 836, and B7 Applications Pneumatic service Most fluids Low pressure hydraulics Non-potable water service Specifications Male pipe swivel push-on hose fitting Dryseal construction Pressure rating: 120 PSI 80 PSI operational performance Brass alloy 360 Cap standard yellow plastic Operating temperature: -40° to 150° F ( -40° to 65° C) Do not use worm gear hose clamps or crimped ferrules Approval: SAE J476, J512, J514 and J516 Assembly (1) Trim hose end with smooth square cut (2) Lubricate either push-on fitting or hose, or both (3) Insert push-on fitting into hose until the first barb in in hose (4) Place end of fitting against a flat object and grip the hose 1 inch from the end. Push with a steady force until end of hose is covered by yellow plastic cap. Disassembly (1) Leave push-on fitting in place and mas 1 in. cut in the hose along the barbed end of the fitting. Be careful not to nick barbs when cutting the hose. (2) With a firm grip on the hose, give a sharp downward pull to release the fitting from the hose. Downloads Data Sheet (PDF Download) 2710402C Dimensional (PDF Download) Catalog Page (PDF Download) MSDS (PDF Download)