TYCON SYSTEMS® Tycon Systems® BreezePro® 400W 12V/24V Horizontal Wind Turbine TPW-400DT-12/24

The BreezePro® Wind Turbines from Tycon Systems® are lightweight at less than 10.5 kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are 12V/24V auto voltage select. The unit includes an embedded smart battery charge controller and dump load resistor. The dump load helps prevent premature braking and increases the total power delivered to the batteries. It also helps protect the turbine in high winds. The entire blade assembly can be removed easily as 1 piece for hurricane protection. This also makes it easier and safer to install. The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output. The mounting is to the inside of the top of a 41mm ID standard pole (1.5" Sched 40). The hardware used is stainless steel for corrosion protection. The units can be used in arrays of multiple turbines to increase available power. Note: Not compatible with lithium ion batteries or products that use lithium ion batteries. Features Integrated Controller with Dump Load to Optimize Performance Wind Turbine startup wind speed of 2.1m/s (4.5mph) Smooth and quiet running maintenance free sealed turbine Sealed die cast aluminum housing for protection from harsh environments Very light and compact Easy Installation and Maintenance Free Operation Electronic over-speed protection Specifications Startup Wind Speed: 2.1m/s (4.5mph) Power Rating: 300W @ 12.5m/s Max Power Output: 400W Battery Charge Voltage Range: 12V = 14.7 to 15.2V ; 24V = 29.4 to 30.4V Turbine Voltage Output: 12V or 24V Auto Select Battery Voltage Controller Operation 12V/24V <14.5V or 29V 100% to battery >14.5V or 29V Split Power to Battery and Dump Load >15V or 30V 100% to Dump Load Rotor Diameter: 1.2m (3.9ft) Blade Material: Glass reinforced nylon Body: Die Cast Aluminum Weatherproofing: IP65 and Salt Mist Corrosion Protected Over-speed Protection: Electronic with integrated dump load Survival Wind Speed: 50m/s (112mph) Noise Level (Measured at 3 meters): 50dBA Type @ 450RPM Wind Load: Wind Surface Area 375 sq in, 30lbs @ 60MPH, 67lbs @ 90MPH Certifications: CE , RoHS Mounting Pole Required: 41mm (1.614") ID (Example 1.5" Sched 40) Operating Temperature: -40C to +60C (-40F to + 140F) Weight: 10.5kg (23lb) Warranty: 2 years Applications Battery Charging Applications Surveillance Cameras Wireless Base Stations Electric Gate Openers, Electric Fences Street Lamps and Signs Remote Cabins and buildings Boats, RVs and static caravans Security Systems Downloads BreezePro - TPW-400DT 400W User Guide (PDF Download)