Clausing Manual Surface Grinder: 18" Table Length, 6" Table Width, 3 Phase, 3,450 RPM, 230 & 460V-2 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 0.748" Wheel Width
Brand:
Clausing
MFR Code:
CSG2A618
Clausing Manual Surface Grinder: 18" Table Length, 6" Table Width, 3 Phase, 3,450 RPM, 230 & 460V-2 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 0.748" Wheel Width
| Clausing
Technical Specifications
| Arbor Hole Diameter (Decimal Inch) | 1.2500 |
| Arbor Hole Diameter | 31.75 mm; 1.25 in |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Arbor Hole Diameter (mm) | 31.75 |
| Operation Type | Semi-Automatic |
| Machine Type | Floor |
| Spindle Speed | 3450.0 |
| Table Length | 18 in; 457.2 mm |
| Wheel Diameter (Inch) | 8 |
| Table Width | 6 in; 152.4 mm |
| Wheel Diameter | 8 in; 203.2 mm |
| Wheel Width (Decimal Inch) | 0.7480 |
| Wheel Width | 0.748 in; 19.0 mm |
| Table Speed | 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min |
| Phase | Three |
| Maximum Cross Grinding Width (Decimal Inch) | 6.6100 |
| Maximum Cross Grinding Width (mm) | 167.89 |
| Maximum Longitudinal Grinding Length (Inch) | 19 |
| Hydraulic Motor Horsepower (HP) | 1.00 |
| Maximum Automatic Crossfeed Transverse Travel | 7 in; 177.8 mm |
| Maximum Cross Grinding Width | 6.61 in; 167.89 mm |
| Maximum Spindle Centerline To Table Distance | 460.0 mm; 18.1102 in |
| Maximum Spindle Centerline to Table Distance (mm) | 460.00 |
| Maximum Longitudinal Table Travel | 19 in; 508.0 mm; 482.6 mm; 20.0 in |
| Maximum Longitudinal Grinding Length | 19 in; 482.6 mm |
| Feed Per Graduation Of Handwheel | 0.0008 in |
| Maximum Manual Crossfeed Transverse Travel | 7.67717 in; 195.0 mm |
| UNSPSC Code | 23241402 |
| Feed Per Revolution Of Handwheel | 0.1969 in |
| Feed Rate Per Graduation Of Handwheel | 0.02 mm |
| Feed Rate Per Revolution Of Handwheel | 5.0 mm |
| Overall Length (Inch) | 71 |
| Voltage | 230/460 V |
| Overall Length | 71 in; 1803.4 mm |
| Vertical Downfeed Handwheel Per Graduation | 0.005 mm; 0.0002 in |
| Vertical Downfeed Handwheel Per Revolution | 1.0 mm; 0.0394 in |
| Max. Longitudinal Grinding Length (Decimal Inch) | 19.0000 |
| Max. Spindle Center to Table Dist. (Decimal Inch) | 18.1102 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | 19.0000 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | 7.677170 |
| Feed Per Revolution of Handwheel (Decimal Inch) | 0.1969 |
| Feed Rate Per Revolution of Handwheel (mm) | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | 0.02 |
| Vertical Down Handwheel Per Rev. (Decimal Inch) | 0.0394 |
| Vertical Downfeed Handwheel Per Revolution (mm) | 1.00 |
| Vertical Down Handwheel Per Grad. (Decimal Inch) | 0.0002 |