Vectrax 9" x 48" Knee Milling Machine: 3 hp, Variable Speed Pulley, 3 Phase-60 to 4,200 RPM, R8 Spindle Taper
Minimum Spindle to Column Distance (Decimal Inch) | : | 6.7500 |
Minimum Spindle to Column Distance (Inch) | : | 6-3/4 |
Minimum Spindle to Column Distance (mm) | : | 171.45 |
Minimum Spindle to Table Distance (Decimal Inch) | : | 2.5000 |
Minimum Spindle to Table Distance (Inch) | : | 2-1/2 |
Minimum Spindle to Table Distance (mm) | : | 60.00 |
Maximum Spindle to Table Distance (mm) | : | 463.55 |
Maximum Spindle to Table Distance (Decimal Inch) | : | 18.2500 |
Minimum Spindle Speed | : | 60 |
Table Length (Inch) | : | 48 |
Table Width (Inch) | : | 9 |
Maximum Spindle Speed | : | 4200 |
Forward Head Tilt (Degrees) | : | 45 |
Phase | : | Three |
Backward Head Tilt (Degrees) | : | 40 |
Left-Hand Head Tilt (Degrees) | : | 90 |
Left-hand Head Tilt | : | 90 |
Right-Hand Head Tilt (Degrees) | : | 90 |
Right-hand Head Tilt | : | 90.0 |
Cross Travel (Decimal Inch) | : | 12.0000 |
Cross Travel | : | 12.0 in |
Longitudinal Travel | : | 31.0 in |
Longitudinal Travel (Decimal Inch) | : | 31.0000 |
Knee Travel (Decimal Inch) | : | 14.2500 |
Knee Travel | : | 14.25 in |
Quill Diameter (Inch) | : | 3-3/8 |
Quill Diameter (mm) | : | 85.73 |
Quill Diameter (Decimal Inch) | : | 3.3750 |
Horsepower | : | 3.00 |
Voltage | : | 460V; 208V |
Table Load Capacity (kg) | : | 200.00 |
Table Load Capacity (Lb.) | : | 441.50 |
Ram Travel Length (Decimal Inch) | : | 13.0000 |
Ram Travel Length (mm) | : | 330.20 |
Ram Travel Length (Inch) | : | 13 |
Spindle Speed Control | : | Variable Speed Pulley |
Spindle Taper Size | : | R8 |
Spindle Travel Length (mm) | : | 127.00 |
Spindle Travel Length (Decimal Inch) | : | 5.0000 |
Spindle Travel Length (Inch) | : | 5 |
Number Of T-slots | : | 3 |
Number of Spindle Speeds | : | 1 |
Overall Height (Mm - 5 Decimals) | : | 2060.57 |
Overall Height (Inch) | : | 81-5/8 |
Overall Length (Inch) | : | 65-1/2 |
Overall Length (Decimal Inch) | : | 65.7500 |
Overall Length (mm) | : | 1670.00 |
UNSPSC Code | : | 23242503 |
Product Service Code | : | 3230 |
Overall Depth (Decimal Inch) | : | 56.1100 |
Overall Depth (Inch) | : | 56 |
Spindle Power Feed Rate Per Minute (in/rev) | : | 0.0015 |
Maximum Spindle To Column Distance (mm) | : | 492.13 |
Maximum Spindle To Column Distance (Decimal Inch) | : | 17.0000 |
Maximum Spindle To Column Distance (Inch) | : | 17 |