<p>Grundfos Unilift CC pumps are single-stage submersible drainage pumps which can pump down to 3 mm above the floor. Designed for pumping rainwater and grey wastewater, wells for surface water with inlets for gutters, sumps, tunnels, swimming pools, pools or fountains. These pumps are suitable for fixed and portable use. The operate automatically. Particles up to 10 mm diameter can pass freely through the pumps. The motor has automatic overload protection to switch the motor off. Once the motor has cooled down to a normal temperature it will start again automatically. </p>

<p>Grundfos Unilift CC pumps are single-stage submersible drainage pumps which can pump down to 3 mm above the floor. Designed for pumping rainwater and grey wastewater, wells for surface water with inlets for gutters, sumps, tunnels, swimming pools, pools or fountains. These pumps are suitable for fixed and portable use. The operate automatically. Particles up to 10 mm diameter can pass freely through the pumps. The motor has automatic overload protection to switch the motor off. Once the motor has cooled down to a normal temperature it will start again automatically. </p>

<p>Grundfos Unilift CC pumps are single-stage submersible drainage pumps which can pump down to 3 mm above the floor. Designed for pumping rainwater and grey wastewater, wells for surface water with inlets for gutters, sumps, tunnels, swimming pools, pools or fountains. These pumps are suitable for fixed and portable use. The operate automatically. Particles up to 10 mm diameter can pass freely through the pumps. The motor has automatic overload protection to switch the motor off. Once the motor has cooled down to a normal temperature it will start again automatically. </p>

<p>Vertical, stainless steel single stage submersible pump with vertical discharge connection and integrated fully sealed single phase submersible motor, class F insulation, with thermal protection. The pump has a strainer basket and handle, and 5 m power cable and vertical float switch to start and stop automatically. The impeller is semi-open, allows the passage of 10 mm objects, suitable for pumping groundwater, surface water, rainwater and similar fluids. The pump has twin shaft seals comprising two oil seals, the space between them is filled with grease. The pump has an outer shell so the pumped fluid continuously cools the motor. The rotor shaft rotates in two maintenance-free carbon bearings, cooled by the pumped fluid. The motor is filled with a non-hazardous oil. </p>