Enco 18" X 5" Compact Milling Drilling Machine, Various Speed, 110V-Single Phase, 45 deg Tilt Head, R8, cETL Certification
Drilling Capacity in Steel (Inch) | : | 33/64 |
End Milling Capacity (Decimal Inch) | : | 0.6299 |
Face Milling Capacity (Decimal Inch) | : | 1.1811 |
Left-Hand Head Tilt (Degrees) | : | 45.00 |
Right-Hand Head Tilt (Degrees) | : | 45.00 |
Cross Travel (Inch) | : | 5-1/8 |
Longitudinal Travel (Inch) | : | 11-13/16 |
Column Type | : | Square |
Speed Setting | : | Variable Speed |
Maximum Spindle to Table Distance (Inch) | : | 10-1/2 |
Minimum Spindle Speed | : | 100 |
Maximum Spindle Speed | : | 2500 |
Number of Spindle Speeds | : | Variable |
Number of T-Slots | : | 3.000 |
Horsepower | : | 1/2 |
Swing Distance (Inch) | : | 6-37/64 |
Table Load Capacity (Lb.) | : | 44.10 |
Table Length (Inch) | : | 18-7/64 |
Table Width (Inch) | : | 4-23/32 |
Phase | : | Single |
Spindle Diameter (Inch) | : | 4-23/32 |
Spindle Speed Control | : | Variable Speed |
Spindle Taper Size | : | R8 |
Spindle Travel Length (Inch) | : | 7-3/32 |
Voltage | : | 110V |
Overall Height (Inch) | : | 29-59/64 |
Overall Length (Inch) | : | 23-15/64 |
Overall Depth (Inch) | : | 22-53/64 |
Includes | : | 13mm drill chuck, wrench set, oil can |
Features | : | Micro feed to feed at 0.002" per line, Variable-speed control and gear drive, Dovetail column and cast iron base for better stability. |
Machine Type | : | Bench; Mill Drill Combination |
Power Down Feed | : | No |
Drilling Capacity in Cast Iron (Inch) | : | 1/2 |
Maximum Spindle To Column Distance (Inch) | : | 6-37/64 |
Special Item Information | : | Overload protection |
UNSPSC Code | : | 23241500 |