<p>Suitable for contaminated water Double mechanical seal in oil compartment: silicon carbide/silicon carbide & tungsten carbide/aluminium oxide. Capacity: max 55 m3/h (Minette 1F) max 60 m3/h (Minette 3F). Head: max 18 m (Minette 1F) max 22 m (Minette 3F). Maximum liquid temperature: 40°C, passes solids of up to 7.5 mm. discharge connection 3” male threaded. Insulation class: F. Classification: IP 68, cable length: 20 m. Optional: float switch. Supply 1-phase 230 Volt 50 Hz (Minette 1F), 3-phase 400 V 50 Hz (Minette 3F). Suitable for continuous use, pump features an air valve, can run dry without limitation. </p>

<p>Suitable for contaminated water Double mechanical seal in oil compartment: silicon carbide/silicon carbide & tungsten carbide/aluminium oxide. Capacity: max 41 m3/h (Minex 1F) max 28 m3/h (Minex Lite) max 40 m3/h (Minex 3F). Head: max 18 m (Minex 1F) max 15 m (Minex Lite) max 17 m (Minex 3F). Maximum liquid temperature: 40°C, passes solids of up to 7.5 mm. discharge connection 2” male threaded. Insulation class: F. Classification: IP 68, cable length: 20 m. Optional: float switch. Supply: 1-phase 230 Volt 50 Hz (Minex 1F and Lite) 3-phase 400 V 50 Hz (Minex 3F) Suitable for continuous use, pump features an air valve, can run dry without limitation. </p>

<p>Suitable for contaminated water Double mechanical seal in oil compartment: silicon carbide/silicon carbide & tungsten carbide/aluminium oxide. Capacity: max 41 m3/h (Minex 1F) max 28 m3/h (Minex Lite) max 40 m3/h (Minex 3F). Head: max 18 m (Minex 1F) max 15 m (Minex Lite) max 17 m (Minex 3F). Maximum liquid temperature: 40°C, passes solids of up to 7.5 mm. discharge connection 2” male threaded. Insulation class: F. Classification: IP 68, cable length: 20 m. Optional: float switch. Supply: 1-phase 230 Volt 50 Hz (Minex 1F and Lite) 3-phase 400 V 50 Hz (Minex 3F) Suitable for continuous use, pump features an air valve, can run dry without limitation. </p>

<p>The E-box is a versatile, fully automatic electronic control that can be used for many applications. The electronic control panel allows automatic operation and protection of one or two pumps for both single-phase and three-phase installations. The E-box basic is only suitable for single-phase 230 V (50-60 Hz) with a rated power per pump of maximum 2.2 kW. The E-box plus is suitable for single-phase 230, three-phase 230 V, three-phase 400 Volt (50-60 Hz) with a rated power per pump to of maximum 5.5 kW. At a glance, the display shows a clear picture of the system status and also any malfunction, if present. </p>

<p>The NMT is a device for controlling the switching on and off of pumps when a certain water level is reached. The electrode sensor is integrated in a plastic casing and is completely submersible. The NMT is not susceptible to interference, there are no moving parts. The switch is equipped with LED indicator lights for switching on/off and water detection. Thanks to the eyes on the side, the NMT is easy to install near or on the pump itself. The level switch works on the principle of measuring variations in conductivity caused by the liquid in which the switch is immersed. The electronics in the switch measure these variations and provide for the switching via a relay. The NMT is suitable for switching pumps up to 1.5 kW at 230 Volt. </p>

<p>This model pump chamber features a Feka 600 MA submersible sewage pump and is therefore very suitable for sewage water (including faecal matter) or rainwater. The pump chamber is supplied complete and is fully assembled. Complete with PVC ball valve, ball non-return valve, 5 m power cable and class A cast iron cover. With a single intake, single discharge pipe, single connection for the cable protection duct and one aeration connection. Excluding high-water warning. Operating range: from 1-16 m³/h with up to 10.2 m head. Temperature range liquid: 0-35°C for household usage. Fluid to be pumped: sewage from septic tank overflow. Maximum solid particle size that passes through pump screen: 25 mm. Chamber diameter: 400 mm. Chamber height excluding cover: 1200 mm. Manhole diameter: 400 mm. Product group: W1. </p>

<p>Vertical, stainless steel single stage submersible pump with vertical discharge connection and integrated fully sealed single phase submersible motor, class F insulation, with thermal protection. The pump has a strainer basket. Vortex impeller, allows 35 mm passage, suitable for pumping surface water, groundwater, rainwater, etc. Pump with double shaft seal and intermediate oil chamber, filled in the factory with non-hazardous oil. The pump features a riser tube, cooling shell for continuous motor cooling by the pumped fluid and long-lasting, maintenance-free ball bearings. </p>

<p>Vertical, stainless steel single stage submersible pump with vertical discharge connection and integrated fully sealed single phase submersible motor, class F insulation, with thermal protection. The pump has a strainer basket. Vortex impeller, allows 50 mm passage, suitable for pumping surface water, groundwater, rainwater, etc. Pump with double shaft seal and intermediate oil chamber, filled in the factory with non-hazardous oil. The pump features a riser tube, cooling shell for continuous motor cooling by the pumped fluid and long-lasting, maintenance-free ball bearings. </p>

<p>For pumping domestic waste water. For installation in tank or basement shaft, or for mobile use. Complete with dry run protection, surface extraction, motor thermostat. </p>